A joined appearance is not enough
Two letters can look connected because their bounding boxes overlap while their visible paths remain separate. A stake can sit directly below a word yet miss every stroke. The result is a loose word and two detached sticks.
Use actual filled shapes to judge overlap. Unite overlapping letters and supports, then inspect the number and position of disconnected components. A dot above an i, a floating star or a second line of text also needs a structural connection.
A practical design sequence
- Choose the finished width and a font with substantial strokes.
- Bring letters together until their shapes overlap, preserving readable counters.
- Add a backing shape or underline when direct letter connections would harm readability.
- Extend the stakes into a substantial part of that backing or lettering.
- Unite the retained geometry. Inspect inside holes and look for isolated parts.
- Export SVG, reopen it and check the machine’s actual cut preview.
Example: two lines with a floating dot
For “Mia” above “ONE,” the dot over the i and the entire top line may be separate pieces. A backing silhouette that joins the two words can also support the dot. Another option is a deliberate decorative connector. Merely grouping the objects changes selection behavior; it does not add material between them.
Position stakes under balanced parts of the design rather than under the widest empty gap. Check that each stake has visible overlap with the retained backing. Wider overlap can help, but suitable dimensions depend on the stock and fabrication process.
Test the smallest connection
At the final size, inspect narrow necks around letters and the transition into each stake. Do a scrap test before producing a gift or an order. Cardstock, plywood and acrylic fail in different ways, so a successful paper preview does not validate an acrylic topper.
The tool generates a starting design; it does not certify strength or suitability for food contact. Keep decorative material away from food using an appropriate food-safe arrangement. For unusual lettering or a production order, request a custom cut file with dimensions, material and attachment requirements.
Sources and scope
This guide explains design decisions and illustrative examples. It does not claim a physical test or a result on every material or machine.
Examples and workflow recommendations are written by AllThingsVector. Inspect every export in the receiving software and test the final design. Editorial approach and corrections.