How to convert PNG to SVG for Cricut

Turn a PNG into cuttable SVG paths, choose colour layers or Print Then Cut, and check the result before using your material.

Choose what you want the machine to make

A cut file describes shapes the blade follows. A PNG describes pixels. Renaming the extension does not create paths, and putting a PNG inside an SVG container does not make its contents cuttable.

For a two-colour vinyl logo, create two groups of filled shapes. For a full-colour sticker, preserve the picture and use a print workflow. For a laser photo, use photo preparation rather than thousands of tiny vector shapes.

A conversion workflow you can inspect

  1. Start with the largest clean original you own. Crop empty borders and remove unwanted background.
  2. Open the vectorizer and choose the image. Begin with automatic colour detection, then reduce detail or colours if small specks appear.
  3. Compare the vector against the original, especially letter counters, narrow gaps and small text.
  4. Download SVG and upload it into Design Space. Ungroup only if you need to assign different materials or colours.
  5. Set the intended physical width and check the mat preview. Make a small test with scrap material.

The vectorizer currently includes five free downloads; see current plans for further use. The separate browser tools have their own access and export options.

Example: a black badge with a white centre

Suppose the original is a black circular badge with a transparent letter A. The A should be a hole in the black shape, not an extra white piece of vinyl. After conversion, place a coloured rectangle behind the badge in an editor. If the letter stays white instead of revealing the rectangle, inspect the white object and the intended compound path.

At the final size, decide whether the smallest gap can be weeded. A shape that looks clean at 800% zoom may be impractical at 25 mm wide. Simplify deliberately rather than increasing trace detail indefinitely.

If the upload or cut still looks wrong

If the picture becomes a solid rectangle, inspect for an embedded bitmap or an unwanted background. If it breaks into many tiny pieces, reduce trace noise. If the upload is rejected, use the SVG upload troubleshooting guide.

A trace cannot recover a missing letter edge from a blurry source. For a brand logo that needs reconstruction, send the best reference to our vector tracing service and explain which details must be preserved.

Sources and scope

Product behavior was checked against these primary references. Software features can change.

Examples and workflow recommendations are written by AllThingsVector. Inspect every export in the receiving software and test the final design. Editorial approach and corrections.