Choose by the result you need
| Source or requirement | Sensible starting point |
|---|---|
| Sharp one-colour silhouette | Automatic trace, then inspect |
| Small blurry screenshot of a logo | Manual reconstruction against the best reference |
| Photo for laser engraving | Raster photo preparation |
| Precise brand lettering or symmetry | Designer redraw and a checked proof |
| Single-stroke score artwork | Centerline trace or purpose-drawn paths |
Why more detail can produce a worse file
A tracing algorithm follows the information in the source, including compression blocks and edge noise. Increasing detail can preserve those defects as extra nodes. Small letters may become bumpy, and close gaps can merge.
A designer can interpret the intended curve or rebuild repeated elements consistently. That is a judgment call, so supply a clear reference and identify details that must not change. Neither method can establish the legal right to use a logo or recover unknown original typography with certainty.
Example: a logo for a shop window
A 180-pixel screenshot might look acceptable on a phone but show irregular letter edges when traced for a 900 mm window decal. First look for the original AI, EPS, SVG or vector PDF. A PDF can contain a bitmap, so inspect the contents rather than relying on its extension.
If no original exists, request a redraw with the finished width, colour count and the vinyl cutter’s requirements. Review a proof at both full size and ordinary viewing distance. Confirm holes, spacing and small shapes before fabrication.
What to send with a redraw request
- The largest source file and any brand colour or font references.
- The intended use: print, vinyl, laser, web or another process.
- The finished physical size and smallest critical detail.
- Required deliverables and the receiving software.
- Whether text must remain editable in a separate master.
Our vector tracing service lists its file formats and quote options. An embroidery machine generally needs a digitized stitch file in addition to artwork; a vector redraw alone is not embroidery digitizing. Ask the fabricator what they require.
Sources and scope
This guide explains design decisions and illustrative examples. It does not claim a physical test or a result on every material or machine.
Examples and workflow recommendations are written by AllThingsVector. Inspect every export in the receiving software and test the final design. Editorial approach and corrections.