Need a laser cut file made? What to send your designer
A useful laser-file request describes the object you want to make, not just the picture you like. “Make this into a DXF” leaves the designer guessing about dimensions, joints and which marks should be engraved. A short, complete brief reduces those guesses and makes the first proof easier to review.
Describe the finished object
State the finished width and height with units. Say whether the design is a flat decoration, a stencil, a layered sign or an assembly. Include a sketch showing how the parts connect. Photograph the reference straight on where possible and send the original file as well as the photograph.
For an organizer, describe what each opening must hold. For a sign, specify the mounting method and whether lettering must remain in one piece. For an ornament, mark the hanging hole and explain whether the surrounding sheet or the cutout is the product.
Give material and machine information
Supply the material type and measured thickness, the machine or fabrication service, the usable bed size, and the software that will import the file. Request the format your operator actually accepts.
Explain which dimensions are critical. A decorative panel can often tolerate small dimensional differences that a sliding joint cannot. Ask who will handle kerf compensation so it is not added twice. Our kerf and slot-fit guide explains why a full cutting width and a per-edge offset are different measurements.
Do not ask a designer to infer machine settings from an image. The operator should choose settings for the actual stock and equipment, following the machine and material guidance.
Mark cut, score and engrave operations
Annotate a reference with words such as “outer cut,” “internal cut,” “score” and “filled engraving.” If you use colour codes, include the key. A red line does not carry the same meaning in every application or shop.
A portrait and a geometric outline also need different preparation. A photograph may suit raster engraving while the outside silhouette uses a vector cut. The cut-and-engrave workflow helps separate those jobs. Do not turn every tonal change in a photograph into a cut line by default.
Copy this request checklist
- Project and intended use.
- Finished dimensions and units.
- Material type and measured thickness.
- Machine, usable bed size and receiving software.
- Original artwork, drawing or references.
- Which areas are cut, scored or engraved.
- Joint, mounting, hanging-hole and connection requirements.
- Required file formats and an annotated proof.
- Deadline for the digital file, plus time for a test and revisions.
Review the proof before production
Check spelling, overall size, holes, part count and operation assignments. Ask for a reference dimension you can measure after importing. Inspect the machine preview and run an appropriate material test before making the full order.
LightBurn’s DXF import settings include unit handling. A correct drawing can still arrive at the wrong scale when the receiving application interprets units differently.
Send your brief to our custom laser cut file service. Confirm the quote, deliverables and schedule for your project. A file request does not reserve fabrication time or guarantee that an untested joint will fit.