How do I prepare a photo for laser engraving?

A photograph that looks good on a screen can engrave poorly because a material has a different tonal response. Preparation starts with the final physical size and a test on the actual material.

Choose the finished size

Open the photo in the laser photo preparation tool. Choose the finished width, output DPI and processing mode. Increasing DPI adds samples to the output; it does not recover missing detail in a small source image, and it does not guarantee that a laser or material can reproduce those samples.

Adjust brightness and contrast while watching highlights and shadows. Excess contrast can remove facial detail. Too little contrast can flatten the subject into the background. If your source has a plain background, the flat background remover can remove a selected colour. It is not subject-aware segmentation for complex hair, fur or scenery.

Compare grayscale and dithering

Compare grayscale with a dithered result. Floyd–Steinberg, Jarvis and Atkinson distribute black and white pixels differently to suggest tones. A threshold creates a simpler binary image that suits some graphics but usually discards too much information for a portrait. Choose a mode suited to the processing your laser software will perform; applying a second dither to an already dithered image can introduce artifacts.

Test the result on your material

The downloaded PNG includes physical-resolution metadata. Check its imported size and the image-processing settings in your laser software. Use a small test matrix with several power and speed settings instead of treating a preview as a calibrated result. Material, coating, focus and machine setup all affect the engraving.

For a different visual effect, the SVG halftone generator creates vector dots, squares or short lines. Pattern spacing controls density and file complexity. Very dense patterns can exceed cutter software's shape limits, so increase spacing when the file becomes hard to handle.

Further reading

LightBurn’s image engraving documentation discusses dithering and pass-through for already processed images.