Why does my laser cut the same line twice?

A laser can travel along what looks like one line twice when the artwork contains duplicate paths, when two pieces share overlapping edges, or when the machine software assigns the same geometry to more than one cutting operation. Those causes need different fixes.

Check for exact duplicates

Start by checking the file rather than changing your laser power. Open the SVG in the SVG repair tool. The checker counts exact duplicate objects in the same parent layer and reports open contours. Download a cleaned copy, import that copy into your machine software and inspect the operation preview.

Separate double outlines from duplicates

An exact duplicate has the same geometry, transform and styling. Two neighboring outlines produced by tracing a thick drawn line are different paths. Deleting one arbitrary outline can damage the drawing; removing duplicates cannot turn those outlines into a centerline. For a pen, scoring or line-engraving workflow, try the centerline tracer on clean, high-contrast line art and inspect the junctions.

Check shared edges and operations

Shared edges are a third case. Two rectangles placed edge to edge can include two coincident edges even though the rectangles themselves are not duplicates. Our repair tool does not merge partial overlapping edges. For a puzzle, the jigsaw generator draws each shared seam once. For other artwork, use your drawing or laser software's overlap-removal controls and inspect the result.

Finally, check operation assignments. A file containing one path can still be cut twice if two enabled operations target it. A preview in the actual machine software is the last check before a scrap-material test.

Further reading

LightBurn: editing artwork and removing duplicates explains duplicate geometry in a laser workflow.